Bottom Brackets - Bottom Brackets
RECORD BOTTOM BRACKETS- Campagnolo
- Three, sealed cartridge style, bearings; two on the chain ring side and one on the non-drive side.
- Campagnolo's lightest bottom bracket; weighs just 190 grams.
- 17 mm, hollow cro-moly steel 102 mm spindle fits 8, 9 and 10 speed, Campy Record and Chorus two ring cranks, from 1995 to present.
- Spindle mid-section is oversized to increase stiffness and reduce weight.
- Unique taper is not interchangeable with Shimano.
- Removable cups are machined from 7000 series aluminum alloy and are easily replaceable.
- Comes with British (1.37 inches x 24 threads per inch) or larger diameter Italian cups (36 mm x 24 threads per inch). Spindles are identical and always 102 mm long.
- Code
- Product
- RRP
- CP800
- RECORD B/B 102MM BSA
- £99.99
- CP802
- RECORD B/B 102MM ITAL
- £99.99
- CP805
- RECORD TRACK B/B 111MM ITAL
- £81.99
- CP804
- RECORD TRACK B/B 111MM BSA
- £81.99
- CP801
- RECORD B/B 111MM TRIPLE BSA
- £109.99
- CP803
- RECORD B/B 111MM TRIPLE ITAL
- £122.50
- CHORUS BOTTOM BRACKETS
- Campagnolo
- Three, sealed cartridge style, bearings; two on the chainring side and one on the non-drive side.
- Weighs just 220 grams; only 30 grams more than Record.
- 17 mm cro-moly steel, 102 mm hollow spindle fits 8, 9 and 10 speed Campy Record and Chorus cranks from 1995 to present.
- Unique taper is not interchangeable with Shimano.
- Removable cups are machined from 7000 series aluminum alloy and are easily replaceable.
- Comes with British (1.37 inches x 24 threads per inch) or larger diameter, Italian cups (36 mm x 24 threads per inch). Spindles are identical and always 102 mm long.
- Code
- Product
- RRP
- CP810
- CHORUS B/B 102MM ITAL
- £69.99
- CP811
- CHORUS B/B 102MM BSA
- £69.99
- CENTAUR BOTTOM BRACKETS
- Campagnolo
Three sealed cartridge style bearings; two on the chain ring side and one on the non-drive side.
- Fits all years and models of Daytona, Racing Triple, Centaur, Veloce and Mirage crank sets. Also fits 1993 and later Athena and pre-1995 Record and Chorus cranks.
- Will NOT fit older Campagnolo Nuovo or Super Record road cranks which require a 115 mm spindle with a 5 mm drive side offset. All newer Campy bottom brackets are symmetrical and lack any drive side offset.
- Comes in two threading configurations with spindle lengths of 111 or 115 mm. Weights listed below are for 111 mm spindles.
- Alloy cups and bearings are similar to Chorus and Record. The hollow cro-moly spindle is similar to the ACH bottom bracket spindle. 233 grams.
- Unique taper is not interchangeable with Shimano.
- Cups are machined from 7000 series aluminum alloy.
- Comes with British (1.37 inches x 24 threads per inch) or larger diameter, Italian cups (36 mm x 24 threads per inch). 16 mm, heat treated cro-moly, spindles are hollow and available in 111 or 115 mm lengths.
- Code
- Product
- RRP
- CP826
- CENTAUR B/B 111MM BSA
- £46.99
- CP827
- CENTAUR B/B 111MM ITAL
- £46.99
- CP828
- CENTAUR B/B 115.5MM ITAL
- £46.99
- CP829
- CENTAUR B/B 115.5MM BSA
- £46.99
- 2011 POWER-TORQUE CUPS
- Campagnolo
In 2007, we revolutionised the bottom bracket concept with the introduction of Ultra Torque technology. For 2011, another amazing solution has been devised for making the mid-range groups even more affordable, while maintaining the same high level performance features.
Ladies and gentlemen, meet Power Torque System.
This time, the axle is in a single piece firmly fixed to the right pedal crank of the crankset. The perfect coupling between central pin and pedal crank is ensured thanks to the particular geometry of the two components; this solution also makes it possible to eliminate the potential play between the different materials.
To make the bottom bracket more efficient, we also worked on the inner part. Thanks to an elaborate sequence of thicknesses, we were able to obtain an incredibly light axle while offering an absolute response in terms of rigidity.
Thanks to the studies conducted by the Campy Tech Lab engineers, material was removed in the zones that could be lightened but at the same time the points of maximum stress were strengthened. Only in this way was it possible to achieve such a high technical value.
A careful working out of the dimensions made it possible to maintain the lateral measurements already defined with the "elder brother" Ultra Torque, thus guaranteeing the maximum freedom of movement and reducing the possibility of contact with the shoes.
The Campagnolo engineers concentrated on ensuring that installation and servicing would be extremely simple. The most complicated work has been done, so now it's up to you to carry out four simple steps to fit the Power Torque System crankset quickly and with no potential for error.
The right-hand bearing is already locked in the axle in correspondence with the crankset; the other is pre-inserted in the left-hand cup. No special tool is required, and the new crankset is ready to propel you over endless miles.
That's right, because another one of the objectives of the Power Torque System project was prolonged operating resistance. The tests conducted by the Campy Tech Lab were very exacting in this regard. Now it's your turn.
- Code
- Product
- RRP
- CPB007
- 2011 POWER-TORQUE CUPS ITAL
- £20.50
- CPB008
- 2011 POWER-TORQUE CUPS BSA
- £20.50
- CPB009
- 2011 POWER-TORQUE BB30 86X41
- £33.50
- CPB010
- 2011 POWER-TORQUE BB30 68X42
- £38.50
- CPB011
- 2011 POWER-TORQUE BB30 68X46
- £38.50
- CPB012
- 2011 CX POWER-TORQUE CUPS ITAL
- £21.99
- CPB013
- 2011 CX POWER-TORQUE CUPS BSA
- £21.99
- ULTRA TORQUE CUPS
- Campagnolo
Replacement overboard bottom bracket cups for Ultra Torque chainsets. Bearings not included!
- Code
- Product
- RRP
- CPB001
- ULTRA TORQUE CUPS ITAL
- £21.50
- CPB002
- ULTRA TORQUE CUPS BSA
- £21.50
- CPB003
- SUPER REC ULTRA TORQUE CUPS ITAL
- £22.50
- CPB004
- SUPER REC ULTRA TORQUE CUPS BSA
- £22.50
- CPB005
- U/T BB30 O/SIZE 86.5MM BB CUPS (PR)
- £26.99
- CPB006
- U/T BB30 O/SIZE 68MM BB CUPS
- £29.99
- CPB014
- U/T BB30 O/SIZE 68 X 46 CUPS
- £29.99
- VELOCE BOTTOM BRACKETS
- Campagnolo
- Steel axle, light alloy cups.
- 111mm spindle for doubles, 115mm spindle for triples or oversized seat tube.
- Sizes: 68x111mm, 68x115.5mm, 70x111mm, 70x115.5mm.
- Code
- Product
- RRP
- CP837
- VELOCE B/B 111MM BSA
- £21.50
- CP839
- VELOCE B/B 115.5MM BSA
- £21.50
- CP836
- VELOCE B/B 111MM ITA
- £21.50
- CP838
- VELOCE B/B 115MM ITA
- £21.50
EVO MAX CUPSET- Miche
Evo Max Bottom Bracket
Evo Max integrated bottom bracket with sealed bearings
- For Over Size spindle of 24mm of diameter
- Lightweight alloy cups
- Thread 36 x 24F" or 1,370 x 24F" (BSC).
- 138g
- Code
- Product
- RRP
- MCBB200
- EVO MAX CUPSET BSA
- £18.99
- MCBB201
- EVO MAX CUPSET ITAL
- £18.99
- PRIMATO TRACK BOTTOM BRACKET
- Miche
Bottom Bracket Unit for use with Primato Advanced Pista/Young C/Set,
- 68 shell
- BSA cups
- 107mm
- Code
- Product
- RRP
- MCBB107
- PRIMATO TRACK BB UNIT 107MM
- £16.99
AXIX LIGHT TITANIUM BOTTOM BRACKETS- TA
- For 68 shell
- TA's lightest bottom bracket.
- It offers fine left/right adjustment for exact adjustment of the chainline
- Sealed cartridge bearings
- Titanium axle
- Weight 145g
- Code
- Product
- RRP
- BBG103
- AXIX LIGHT TITANIUM B/B 103MM
- £109.99
- BBG107
- AXIX LIGHT TITANIUM B/B 107MM
- £109.99
- BBG110
- AXIX LIGHT TITANIUM B/B 110MM
- £109.99
- BBG113
- AXIX LIGHT TITANIUM B/B 113MM
- £109.99
- BBG116
- AXIX LIGHT TITANIUM B/B 116MM
- £109.99
- BBG119
- AXIX LIGHT TITANIUM B/B 119MM
- £109.99
- BBG122
- AXIX LIGHT TITANIUM B/B 122MM
- £109.99
- AXIX LIGHT ITALIAN BOTTOM BRACKETS
- TA
- For 68 shell
- TA bottom brackets offer fine left/right adjustment for exact adjustment of the chainline
- Sealed cartridge bearings
- Steel axle
- Weight 220g
- Code
- Product
- RRP
- BBH103
- AXIX LIGHT ITALIAN B/B 103MM
- £72.99
- BBH107
- AXIX LIGHT ITALIAN B/B 107MM
- £72.99
- BBH110
- AXIX LIGHT ITALIAN B/B 110MM
- £72.99
- BBH113
- AXIX LIGHT ITALIAN B/B 113MM
- £72.99
- BBH116
- AXIX LIGHT ITALIAN B/B 116MM
- £72.99
- BBH119
- AXIX LIGHT ITALIAN B/B 119MM
- £72.99
- BBH122
- AXIX LIGHT ITALIAN B/B 122MM
- £72.99
- BBH125
- AXIX LIGHT ITALIAN B/B 125MM
- £72.99
- BBH131
- AXIX LIGHT ITALIAN B/B 131MM
- £72.99
- AXIX LIGHT BSA BOTTOM BRACKETS
- TA
- For 68 shell
- TA bottom brackets offer fine left/right adjustment for exact adjustment of the chainline
- Sealed cartridge bearings
- Steel axle
- Weight 220g
- Code
- Product
- RRP
- BBA103
- AXIX LIGHT BSA B/B 103MM
- £72.99
- BBA107
- AXIX LIGHT BSA B/B 107MM
- £72.99
- BBA110
- AXIX LIGHT BSA B/B 110MM
- £72.99
- BBA113
- AXIX LIGHT BSA B/B 113MM
- £72.99
- BBA116
- AXIX LIGHT BSA B/B 116MM
- £72.99
- BBA119
- AXIX LIGHT BSA B/B 119MM
- £72.99
- BBA122
- AXIX LIGHT BSA B/B 122MM
- £72.99
- BBA125
- AXIX LIGHT BSA B/B 125MM
- £72.99
- BBA131
- AXIX LIGHT BSA B/B 131MM
- £72.99
CAMPAG FIT B/BRACKET- Tifosi
Tifosi carbon shelled campag fit bottom bracket
- Cr Mo Axle (102/111/115mm)
- 68mm carbon shell
- ISO Italian taper (campag)
- British or Italian tread
- (includes crank bolts)
- Code
- Product
- RRP
- TK100
- CAMPAG FIT B/BRACKET 102MM BSA
- £24.99
- TK101
- CAMPAG FIT B/BRACKET 102MM ITAL
- £24.99
- TK110
- CAMPAG FIT B/BRACKET 111MM BSA
- £24.99
- TK111
- CAMPAG FIT B/BRACKET 111MM ITAL
- £24.99
- TK115
- CAMPAG FIT B/BRACKET 115MM BSA
- £24.99