EPS Electronic - Front Derailleurs

EPS Electronic Power Shift

Campagnolo Super Record is the lightest electronic drivetrain in the World. Both Super Record and Record EPS are a technology concentrate capable of unparalleled performance and the world's only 11 speed electronic drivetrain.

Just 5 principal components are all that is needed to convert a Campagnolo 11x speed gear system to EPS – front and rear mechs, EPS Ergo levers, a power unit and battery charger kit.

There are no fewer than 8 distinct advantages of the system.

Campagnolo EPS - the main benefits :-

  • • Four hours charge time.
  • • 2000 kms to one charge, when ridden consistently - dropping to 1700 kms if used over the course of 3 months, the system runs self-diagnostics to detect any faults.
  • • EPS has a small magnet that can be inserted in to the battery pack to turn the system on and off, to save charge when not used over long periods.
  • • EPS is fully waterproof; The Movistar team ran the system under water for 30mins during their team launch.
  • • Holding the up or down shift buttons for a longer period will allow a "double shift".
  • • Ability to climb the full block in just over 1.0 second by holding the up shift, and dropping the whole block in under 0.8 of a second by holding the downshift lever.
  • • Ride Home function. When all your charge has been used you are able to ride back home manually shifting the rear mech by disengaging the motor allowing gear changing by hand.
  • • The shift buttons give the traditional Campagnolo click when pressed, this simulates the shift of the mechanical system with the benefits of digital system.
sort products by:
    • Super Record EPS Front Mech 2015
    • Campagnolo
    • Super Record EPS Front Mech 2015

      Compatible with 2014 EPS Super Record Groupsets.

      The fastest, most precise derailing action available in cycling. A difficult objective that challenged the skills of the engineers of the Campy Tech LabTM. But the results have far exceeded all expectations. Unparalleled derailing precision and speed - even under strain - achieved through an innovative project and painstaking attention to detail.

      HIGH TORQUE, HIGH DRIVE RATIO MOTORS Campagnolo has used the world's best electric motors for this application. These units ensure effective shifting even under strain, deliver the same performance time after time and make extremely fast, precise shifts possible.

      POSITION SENSOR With the "Magnetic Hall Sensor Resolver(TM)", the front derailleur always moves the chain automatically into the ideal position for the selected sprocket/chainring.

      FRONT DERAILLEUR BODY IN MONOLITHIC CARBON POWDER TECHNOPOLYMER For maximum lightness and superlative stiffness.

      NEW INTERNAL AND EXTERNAL DERAILLER CAGE DESIGN, WITH ALUMINIUM AND CARBON FIBRE CONSTRUCTION A design optimised for the EPS(TM) drivetrain for maximised lightness and stiffness. Extreme derailing speed and precision even under strain.

      100% WATERPROOF All the components of the front derailleur are built to operate in any weather conditions in compliance with the IP67 standard.

      CSD (Chain Security Device) The new CSD chain security device achieves extremely high stiffness levels, in addition to offering regulation that is completely independent from that of the derailleur. Compatible with all the braze-on derailleurs from the Campagnolo range.

      DERAILLEUR CLIP CLAMP Allows perfect interfacing with the Campagnolo braze-on derailleur,guaranteeing maximum possible stiffness on frames with this kind of derailleur attachment. Available in 32 mm and 35 mm diameters.

      FRONT DERAILLEUR MOUNTING TOOL Faster installation with better results, this mounting tool makes the mechanics job easier and more exact.

        • Code
        • Product
        • RRP
        • CPE207D
        • S-Record Eps B/O Front Mech
        • £539.99
    • EPS Super Record Front Mech
    • Campagnolo
    • EPS Super Record Front Mech

      Compatible with 2015 EPS Super Record Groupsets.

      The Campagnolo EPS drivetrain is an organic set of mechanical and electronic components that work together in an integrated way to guarantee maximum performance. In particular, the EPS derailleur interacts with the mechanical crank set and enhances the elevated derailleur speed and precision made possible with X.P.S.S. technology. The 8 special upward zones and 2 downward zones for the chainrings associated to the speed and precision of the new EPS derailleur guarantee top performance.

      The derailleur is composed of a mechanical structure with dropout and a series of electronic parts. The outer Derailleur Rod held in place by a double-finned pin that passes all the way through to increase rigidity. The System that links the derailleur to the frame is made of aluminium co-pressed with the engineering polymer of the body of the derailleur. This creates optimal solidity and rigidity ensuring that the derailleur maintains a correct position with respect to the frame. The core of the derailleur is composed of an electronic actuator; in turn composed of a gear motor with a built-in resolver that uses Magnetic Hall Sensor technology (as the sensor is not in contact it is not affected by the vibrations generated by the terrain, and is therefore always precise). The gear motor was developed in partnership with a Swiss company that produces electric motors used in missions to Mars. The actuator is also equipped with a "cascade gearbox" which allows movement to be transferred in an exact and rapid manner.

      AUTOMATIC CORRECTION: Compared to the traditional mechanical derailleur that could be adjusted with micro displacements made by acting on the levers manually, the EPS derailleur is equipped with a very sophisticated electronic AUTOMATIC POSITION CORRECTION system.

      DTI: Digital Tech Intelligence is housed inside the Power Unit and it continuously monitors the signals that arrive from all the EPS components, thus managing their operation.

      WATER PROOF: In order to achieve the IP67 classification, all the electronic components of the EPS system underwent a series of tests, which proved their ability to function perfectly under one meter of water for at least 30 minutes.

        • Code
        • Product
        • RRP
        • CPE207
        • EPS Super Record Frt Mech B/O
        • £471.99
    • Record EPS Front Mech 2015
    • Campagnolo
    • Record EPS Front Mech 2015

      Compatible with 2014 Record EPS Groupsets

      A powerful punch in a tiny package! Boasting an optimised design and driven by the highest quality motors available today, the front derailleur moves the chain precisely in all conditions, even under strain. The result is a derailing speed like nothing you've ever seen before, with the chain shifting up and down from one chainring to the next with truly astonishing speed and precision.

      HIGH TORQUE, HIGH DRIVE RATIO MOTORS Campagnolo has used the world's best electric motors for this application. These units ensure effective shifting even under strain, deliver the same performance time after time and make extremely fast, precise shifts possible.

      POSITION SENSOR With the "Magnetic Hall Sensor Resolver(TM)", the front derailleur always moves the chain automatically into the ideal position for the selected sprocket/chainring.

      FRONT DERAILLEUR BODY IN MONOLITHIC CARBON POWDER TECHNOPOLYMER For maximum lightness and superlative stiffness.

      NEW INTERNAL AND EXTERNAL DERAILLER CAGE DESIGN, WITH ALUMINIUM AND CARBON FIBRE CONSTRUCTION A design optimised for the EPS(TM) drivetrain for maximised lightness and stiffness. Extreme derailing speed and precision even under strain.

      100% WATERPROOF All the components of the front derailleur are built to operate in any weather conditions in compliance with the IP67 standard.

      CSD (Chain Security Device) the new CSD chain security device achieves extremely high stiffness levels, in addition to offering regulation that is completely independent from that of the derailleur. Compatible with all the braze-on derailleurs from the Campagnolo range.

      DERAILLEUR CLIP CLAMP Allows perfect interfacing with the Campagnolo braze-on derailleur, guaranteeing maximum possible stiffness on frames with this kind of derailleur attachment. Available in 32 mm and 35 mm diameters.

      FRONT DERAILLEUR MOUNTING TOOL faster installation with better results, this mounting tool makes the mechanics job easier and more exact.

        • Code
        • Product
        • RRP
        • CPE204D
        • Record Eps B/O Front Mech
        • £427.99
    • EPS Record Front Mech
    • Campagnolo
    • EPS Record Front Mech

      Compatible with 2015 Record EPS Groupsets

      The Campagnolo EPS drivetrain is an organic set of mechanical and electronic components that work together in an integrated way to guarantee maximum performance. In particular, the EPS derailleur interacts with the mechanical crank set and enhances the elevated derailleur speed and precision made possible with X.P.S.S. technology. The 8 special upward zones and 2 downward zones for the chainrings associated to the speed and precision of the new EPS derailleur guarantee top performance.

      The derailleur is composed of a mechanical structure with dropout and a series of electronic parts. The outer Derailleur Rod held in place by a double-finned pin that passes all the way through to increase rigidity. The System that links the derailleur to the frame is made of aluminium co-pressed with the engineering polymer of the body of the derailleur. This creates optimal solidity and rigidity ensuring that the derailleur maintains a correct position with respect to the frame. The core of the derailleur is composed of an electronic actuator; in turn composed of a gear motor with a built-in resolver that uses Magnetic Hall Sensor technology (as the sensor is not in contact it is not affected by the vibrations generated by the terrain, and is therefore always precise). The gear motor was developed in partnership with a Swiss company that produces electric motors used in missions to Mars. The actuator is also equipped with a "cascade gearbox" which allows movement to be transferred in an exact and rapid manner.

      AUTOMATIC CORRECTION: Compared to the traditional mechanical derailleur that could be adjusted with micro displacements made by acting on the levers manually, the EPS derailleur is equipped with a very sophisticated electronic AUTOMATIC POSITION CORRECTION system.

      DTI: Digital Tech Intelligence is housed inside the Power Unit and it continuously monitors the signals that arrive from all the EPS components, thus managing their operation.

      WATER PROOF: In order to achieve the IP67 classification, all the electronic components of the EPS system underwent a series of tests, which proved their ability to function perfectly under one meter of water for at least 30 minutes.

        • Code
        • Product
        • RRP
        • CPE204
        • EPS Record Front Mech B/O
        • £374.99
    • Chorus EPS Front Mech
    • Campagnolo
    • Chorus EPS Front Mech

      Compatible with Athena EPS Groupsets

      Campagnolo(R) uses the best and most powerful motors. The motors used in EPSTM components ensure precise shifting even under strain and deliver the speediest shifting available with no loss in performance over time.

      Features And Benefits HIGH TORQUE, HIGH DRIVE RATIO MOTORS Campagnolo has used the world's best electric motors for this application. These units ensure effective shifting even under strain, deliver the same performance time after time and make extremely fast, precise shifts possible.

      POSITION SENSOR With the "Magnetic Hall Sensor Resolver(TM)", the front derailleur always moves the chain automatically into the ideal position for the selected sprocket/chainring.

      FRONT DERAILLEUR BODY IN MONOLITHIC CARBON POWDER TECHNOPOLYMER For maximum lightness and superlative stiffness.

      NEW INTERNAL AND EXTERNAL DERAILLER CAGE DESIGN WITH STEEL CONSTRUCTION A design optimised for the EPS(TM) drivetrain for maximised lightness and stiffness. Extreme derailing speed and precision even under strain.

      100% WATERPROOF All the components of the front derailleur are built to operate in any weather conditions in compliance with the IP67 standard.

      CSD(TM) (Chain Security Device) The new CSD chain security device achieves extremely high stiffness levels, in addition to offering regulation that is completely independent from that of the derailleur. Compatible with all the braze-on derailleurs from the Campagnolo range.

      DERAILLEUR CLIP CLAMP Allows perfect interfacing with the Campagnolo braze-on derailleur, guaranteeing maximum possible stiffness on frames with this kind of derailleur attachment. Available in 32 mm and 35 mm diameters.

      FRONT DERAILLEUR MOUNTING TOOL faster installation with better results, this mounting tool makes the mechanics job easier and more exact.

        • Code
        • Product
        • RRP
        • CPE210
        • Chorus Eps B/O Frt Mech
        • £329.99